DPCAV
9 GRAM R/C HOBBY SERVO
| Note | Servo styles, colors, and arm hardware may vary. |
| Supply voltage | 4.8V - 6V |
| Speed | 0.12sec, Torque |
| Cable length | 125mm |
| Dimensions (L x W x H) | Approximately 23 x 27 x 11 mm (may vary slightly). |
| Weight | ~9 grams, not including cable. |
General Specs:, ,
Generic (OEM) brand mini sized R/C hobby servo. It is ...DPCAV
5.8GHZ AUDIO/VIDEO TRANSMITTER, 600MW
| Frequency | 5.8GHz RF band. |
| RF Power | 600mW, +28dBm |
| RF Port | 50 ohms. |
| Channels | Seven (5740, 5760, 5780, 5800, 5820, 5840, 5860 MHz). |
| Video Input | Composite NTSC / PAL, 75 ohms. |
| Audio Mode | Stereo (left / right channels). |
| Audio Sub-carrier | 6.0 / 6.5 MHz |
| Audio Input | 1V Line Level, >10K ohms. |
| Antenna Connector | SMA type. |
| Operating Voltage | 7 - 25 VDC |
| Accessory Voltage | 5.0VDC output / 300mA maximum. |
| Weight | 25 grams (with antenna). |
| Size | 50 x 23 x 11mm. |
New for 2012:, Smaller Size, wider operating voltage., This transmitter is compatible with 5.8GHz A/V receivers offered by ImmersionRC, Airwave, and FatShark. Here's a list of popular receivers that we offer:, , Features and Specifications:, , Important:, , Notice: This is a ham radio hobby type product. Using the TX-5G8-600 in the USA and most other countries will require an Amateur Radio license. Some countries may forbid its use. It is your responsibility to ensure that its use meets the requirements imposed by your government’s RF spectrum regulations. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them., Frequency Summary List:, , Instruction Manual:, Click Me!,
The TX-5G8-600 5.8GHz 600mW A/V transmitter packs a powerful punch ...DPCAV
FY-30A PRO R/C INERTIAL STABILIZER SYSTEM
Sold Out:, No longer available., How it works:, , Applications:, , The FY30A can be used in the following fixed wing models:, , Compare FY-30A to FY-20A:, Click Me!, Instruction Manual:, Click Me!, Firmware Update Instructions:, Click Me!, Firmware V1.20 Upgrade Files:, Click Me!, Firmware PC Application:, Click Me!, Manufacture's web site:, Click Me!, Sold Out:, No longer available.,
But don't worry, we now offer a lower cost replacement ...DPCAV
ELOGGER VIDEO OSD-PRO EXPANDER MODULE
| Video Compatibility | NTSC / PAL. |
| Power | Provided by eLogger V3 (sold separately). |
| Video I/O | Two 3-Pin headers. |
| Audio I/O | Two 3-Pin headers. |
| Size | 2.4 x 1.0 inches (61 x 25 mm). |
| Weight | 0.5 ounces (13.5 grams). |
| Instruction Manual | Click Me! |
| Eagle Tree Web Site | Click Me! |
The OSD Pro is a powerful, modular, and fully configurable video/audio On-Screen Display (OSD) device. It provides graphics and voice announcements that report a variety of alarms and data, including: acoustic variometer, electrical performance, Home Arrow, Return to Home, Failsafe, “RADAR”, waypoints, and many other features., how YOU configure the display. Here's a screen shot that shows some of the information that can be shown:, , All the data parameters that are supported by the eLogger can be displayed on the video display. Here are some examples:, , Specification Summary:, IMPORTANT NOTE: The OSD-Pro requires the EagleTree eLogger V3 or V4 module. To display navigation related data the GPS expander module is needed. These items are available separately (please see the related items links shown near the bottom of the page).,
The Eagle Tree Video OSD Pro Expander module adds graphical ...DPCAV
EAGLETREE OSD-PRO FPV SYSTEM, 3-PIECE KIT
As shown in the photo, the kit provides the following Eagle Tree components:, , This OSD will provide graphic data (and voice announcements) that report a variety of alarms and data, including: voltage, current, mAH, Watts, Home Arrow, Return to Home (RTH / RTL), RADAR, altitude, course (travel direction), ground speed, longitude, latitude, and navigation waypoints. You can expand the reported telemetry information even further by using low cost eLogger accessories, such as these:Click Me!, Here's a screen shot that shows some of the information that can be shown (temperature and RPM data requires optional accessories):, , All the data parameters that are supported by the eLogger can be displayed on your existing video display. Here are some examples:, , Here's some useful links to the manufacturer's web site:, Click Me,
We take the guesswork out of purchasing an OSD telemetry ...DPCAV
5.8GHZ CLOVERLEAF ANTENNA, RHCP
| Center Frequency | 5.8GHz |
| RF Bandwidth | 120MHz |
| Gain, 3-lobe | ~1.2dBiC |
| Beamwidth | 360° omni |
| Polarization | RHCP |
| RF connector | SMA Plug |
| Height | 1.2 inch |
| Width | 1.2 inch |
| Weight | 4.4g |
| REFERENCE PLOTS | ANTENNA RF PATTERNS |
Manufacture:, Aerial Video Systems, Important: To ensure RF performance do NOT add paint or coat the element lobes (leave the factory applied finish as-is). The elements should not be allowed to rest against any structures. Do not bend or deform the elements., NOTE: Some FPV model installations may need an extension to ensure the antenna is away from nearby surfaces.,
The 5.8GHz Cloverleaf antenna is circularly polarized (RHCP) and designed ...DPCAV
PANDORA PAN & TILT KIT
| Pan Axis | one |
| Tilt Axis | one |
| PTP-002 Tilt Plate for DPC-420/480 Camera | Click Me! |
| PTP-003 Tilt Plate for DPC-171/DPC-520S Camera | Click Me! |
| PTP-004 Tilt Plate for DPC-161/CX161-BW Camera | Click Me! |
| Instruction Manual | Click Me! |
DPCAV
HYPERION ATLAS DIGITAL MICRO SERVO, HP-DS13TMB
,
HP-DS13-TMB Hyperion Atlas digital micro servo with metal gears. Ideal ...DPCAV
HYPERION ATLAS DIGITAL MICRO SERVO, HP-DS13TCB
,
HP-DS13-TCB Hyperion Atlas digital micro servo. Perfect for compact pan ...DPCAV
SUPER HIGH TORQUE SERVO, METAL GEARS
Servo dimensions (Refer to the drawing at end of page):,
This giant-sized analog servo has more than 450 oz-in (33 ...DPCAV
HIGH TORQUE SERVO, METAL GEARS
Servo dimensions (refer to the drawing at end of page):,
This analog servo has more than 200 oz-in (33 kg-cm) ...DPCAV
LOCOSYS LS20033 5HZ GPS EVALUATION BOARD
| Full details to the LS20033 GPS module are found here | Click Me |
USB Driver for Win 2K/XP:, Click Me!, LS20033 Data Sheet:, Click Me!, MTK Command Set:, Click Me!, MTK Mini GPS App:, , GPS Fox App (Win 2000/XP):,
SPECIAL OFFER , only one remaining! This is a complete ...DPCAV
SERVO DRIVER PRO (SERVO ADJUSTER / TESTER)
MX8340 Servo Driver Pro:, This compact servo signal emulator is used to test and evaluate R/C servos. It can also be used to program our, Features:,
ShutterBug Pro camera controller in applications where a R/C system ...DPCAV
OSCILLOSCOPE PROBE, 100MHZ
Features:, X1 / X10 attenuation range switch., Special Bonus:, If you order two probes (one pair) we will include a handy probe pouch and compensation adjustment screwdriver.,
These scope probes are just what you need to replace ...DPCAV
DIGITAL OSCILLOSCOPE, 5MHZ (PORTABLE)
| Source Coupling | DC / AC / GND. |
| Storage Mode | Hold/run, BMP export. |
| Instruction Manual | Click Me! |
| Manufacture's Web Site | Click Me! |
Portable 5MHz Digital Oscilloscope:, It is hard to find a portable scope at this price with all these features. It has 5MHz bandwidth, FFT frequency domain display, a 20MHz frequency counter, and rechargeable battery pack. To make it a sweeter deal, you get a switchable 10X scope probe too!, Features:, Max Real Time sample rate - 2MSPS，8 bits., Useful Links:,
This is a FACTORY ASSEMBLED scope; It is not a ...